Holden Commodore Sedan Lowering Springs

$299.90 – $599.80

Cobra Lowering Springs to fit Holden Commodore Sedan (see below for model fitment)

Cobra Lowering springs will approximately drop 30-35mm below standard height*
Some Holden Commodores will only lower 20-25mm if this is an issue please contact us before ordering and we can check if this applies to your vehicle

Quantity
SKU: N/A Category: Tags: , , , , , , , , , , , , , , , , , , , , , , ,

Description

Holden Commodore Sedan Cobra Lowering Springs

Holden Commodore Sedan VB-VK Sedan 8 cyl. 1978-1986
NOTE: REAR SUPERLOW Short shock required to retain coils. Can use KYB 343038SP1
Front Low #CHFL-14
Front Superlow #CHFL-15L
Rear Low #CHRL-12
Rear Superlow #CHRL-18L

Holden Commodore Sedan VB-VK Sedan 6 cyl. 1978-1986
NOTE: REAR SUPERLOW Short shock required to retain coils. Can use KYB 343038SP1
Front Low #CHFL-18
Front Superlow #CHFL-18L
Rear Low #CHRL-12
Rear Superlow #CHRL-18L

Holden Commodore Sedan VL-VP Sedan 8 cyl. with live axle rear 1986-1993
NOTE: Rear short shock required to retain coils. Can use KYB 343038SP1
Front Low #CHFL-14
Front Superlow #CHFL-15L
Rear Low #CHRL-18L
Rear Superlow #CHRL-18L

Holden Commodore Sedan VL-VP Sedan 6 cyl. with live axle rear 1986-1993
NOTE: Rear short shock required to retain coils. Can use KYB 343038SP1
Front Low #CHFL-18
Front Superlow #CHFL-18L
Rear Low #CHRL-18L
Rear Superlow #CHRL-18L

Holden Commodore Sedan VP Sedan 8 cyl. with IRS 1991-1993
NOTE: Rear camber adjustment kits should be fitted when lowered coils are installed
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
Front Low #CHFL-14
Front Superlow #CHFL-15L
Rear Low #CHRL-21
Rear Superlow #CHRL-21L

Holden Commodore Sedan VP Sedan 6 cyl. with IRS 1991-1993
NOTE: Rear camber adjustment kits should be fitted when lowered coils are installed
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
Front Low #CHFL-18
Front Superlow #CHFL-18L
Rear Low #CHRL-21
Rear Superlow #CHRL-21L

Holden Commodore Sedan VR & VS Sedan V8 with IRS 1993-1997
NOTE: Rear camber adjustment kits should be fitted when lowered coils are installed
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
Front Low #CHFL-20
Front Superlow #CHFL-15
Rear Low #CHRL-21
Rear Superlow #CHRL-21L

Holden Commodore Sedan VR & VS Sedan V6 with live axle rear 1993-1997
NOTE: Rear short shock required to retain coils. Can use KYB 343038SP1
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Low #CHRL-18L
Rear Superlow #CHRL-19

Holden Commodore Sedan VR & VS Sedan V6 with IRS 1993-1997
NOTE: Rear camber adjustment kits should be fitted when lowered coils are installed
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Low #CHRL-21
Rear Superlow #CHRL-21L

Holden Commodore Sedan VR & VS 8 cyl. Sedan with live axle rear 1993-1997
NOTE: Rear short shock required to retain coils. Can use KYB 343038SP1
Front Low #CHFL-20
Front Superlow #CHFL-15
Rear Low #CHRL-18L
Rear Superlow #CHRL-19

Holden Commodore Sedan VT,VU,VX,VY & VZ Sedan V6 1997-2006
NOTE: Rear camber adjustment kits should be fitted when lowered coils are installed
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Low #CHRL-210
Rear Superlow #CHRL-205

Holden Commodore Sedan VT,VU,VX,VY & VZ Sedan (Holden V8) 1997-2006
NOTE: Rear camber adjustment kits should be fitted when lowered coils are installed
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
Front Low #CHFL-20
Front Superlow #CHFL-15
Rear Low #CHRL-210
Rear Superlow #CHRL-205

Holden Commodore Sedan VT,VU,VX,VY & VZ Sedan (Alloy V8) 1997-2006
NOTE: Rear camber adjustment kits should be fitted when lowered coils are installed
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Low #CHRL-210
Rear Superlow #CHRL-205

Holden Commodore Sedan VE Sedan with FE2 suspension 2006-2013
Front Low #CHFL-96L
Rear Low #CHRL-97L

Holden Commodore Sedan VE Sedan Calais 2006-2013
Front Low #CHFL-96L
Rear Low #CHRL-97L

Holden Commodore Sedan VE Sedan 2006-2013
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
NOTE: REAR SUPERLOW Fit short shocks when using these coils. Part number 35-0652 or equivalent.
NOTE: Fit Ultra Low part number CHRL-97LL to lower rear further for flatter stance.
Front Low #CHFL-96
Front Superlow #CHFL-96L
Rear Low #CHRL-97
Rear Superlow #CHRL-97L
Rear Ultra Low #CHRL-97LL

Holden Commodore Sedan VF Sedan 2013-16
NOTE: Cobra Superlow springs are predominently designed for display cars. Care should be taken that all legal requirements including 100mm ground clearance, spring entrapment, sufficient bumpstop travel, etc. are maintained. In some cases certification may be required.
NOTE: Fit short shocks when using these coils. Part number 35-0652 or equivalent.
NOTE: Fit Ultra low part number CHRL-276LL to lower rear further for a flatter stance.
Front Low #CHFL-275
Front Superlow #CHFL-275L
Rear Low #CHRL-276
Rear Superlow #CHRL-276L
Rear Ultra Low #CHRL-276LL

Additional information

Front Lowering Spring Options

NO FRONT SPRINGS, CHFL-14, CHFL-15, CHFL-15L, CHFL-18, CHFL-18L, CHFL-20, CHFL-96, CHFL-96L, CHFL-275
Rear Lowering Spring Options

NO REAR SPRINGS, CHRL-12, CHRL-18L, CHRL-19, CHRL-21, CHRL-21L, CHRL-97, CHRL-97L, CHRL-97LL, CHRL-205, CHRL-210, CHRL-276, CHRL-276L, CHRL-276LL

Related products