Holden Commodore Ute Lowering Springs

$199.90 – $649.80

Cobra Lowering Springs to fit Holden Commodore Ute (see below for model fitment)

Cobra Lowering springs will approximately drop 30-35mm below standard height*
Cobra Superlow Lowering Springs will approximately drop 40-45mm below standard height.
Superlow coils may lower vehicle under 100mm ground clearance depending on wheel & tyre diameter. Certification will be required if this is the case.

Quantity
SKU: N/A Category: Tags: , , , , , , , , , , , , , , , ,

Description

Holden Commodore Ute Cobra Lowering Springs

Holden Commodore Ute VG-VP 8 cyl. (Light use) 1990-1993
NOTE 1: Rear Light use only (Heavy Use Below)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0570
Front Low #CHFL-14
Front Superlow #CHFL-15
Rear Low #CHRL-23
Rear Superlow #CHRL-23L

Holden Commodore Ute VG-VP 8 cyl. (Heavy use) 1990-1993
NOTE 1: Rear Heavy use only (Light Use Above)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0570
Front Low #CHFL-14
Front Superlow #CHFL-15
Rear Low #CHRL-23H
Rear Superlow #CHRL-86

Holden Commodore Ute VG-VP 6 cyl. (Light use) 1990-1993
NOTE 1: Rear Light use only (Heavy Use Below)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0570
Front Low #CHFL-18
Front Superlow #CHFL-15L
Rear Low #CHRL-23
Rear Superlow #CHRL-23L

Holden Commodore Ute VG-VP 6 cyl. (Heavy use) 1990-1993
NOTE 1: Rear Heavy use only (Light Use Above)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0570
Front Low #CHFL-18
Front Superlow #CHFL-15L
Rear Low #CHRL-23H
Rear Superlow #CHRL-86

Holden Commodore Ute VR-VS 8 cyl. (Light use) 1993-2000
NOTE 1: Rear Light use only (Heavy Use Below)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0570
Front Low #CHFL-14
Front Superlow #CHFL-15
Rear Low #CHRL-23
Rear Superlow #CHRL-23L

Holden Commodore Ute VR-VS 8 cyl. (Heavy use) 1993-2000
NOTE 1: Rear Heavy use only (Light Use Above)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0570
Front Low #CHFL-14
Front Superlow #CHFL-15
Rear Low #CHRL-23H
Rear Superlow #CHRL-86

Holden Commodore Ute VR-VS 6 cyl. (Light use) 1993-2000
NOTE 1: Rear Light use only (Heavy Use Below)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0570
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Low #CHRL-23
Rear Superlow #CHRL-23L

Holden Commodore Ute VR-VS 6 cyl. (Heavy use) 1993-2000
NOTE 1: Rear Heavy use only (Light Use Above)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0570
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Low #CHRL-23H
Rear Superlow #CHRL-86

Holden Commodore Ute VU-VZ 8 cyl. (Light use) 2001-2007
NOTE: Rear Light use only (Heavy Use Below)
Front Low #CHFL-20
Front Superlow #CHFL-15
Rear Low #CHRL-213
Rear Superlow #CHRL-214

Holden Commodore Ute VU-VZ 8 cyl. (Heavy use) 2001-2007
NOTE 1: Rear Heavy use only (Light Use Above)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0568
Front Low #CHFL-20
Front Superlow #CHFL-15
Rear Low #CHRL-87
Rear Superlow #CHRL-214H

Holden Commodore Ute VU-VZ 6 cyl. (Light use) 2001-2007
NOTE: Rear Light use only (Heavy Use Below)
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Low #CHRL-213
Rear Superlow #CHRL-214

Holden Commodore Ute VU-VZ 6 cyl. (Heavy use) 2001-2007
NOTE 1: Rear Heavy use only (Light Use Above)
NOTE 2: Short shock required to retain coils. Can use Monroe 15-0568
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Low #CHRL-87
Rear Superlow #CHRL-214H

Holden Commodore Ute VY-VZ 1 Tonner V8 2003-2006
Front Low #CHFL-14
Front Superlow #CHFL-15
Rear Lowering Blocks 38mm (1.5″) tall #LB225
Rear Lowering Blocks 50mm (2.0″) tall #LB226

Holden Commodore Ute VY-VZ 1 Tonner V6 2003-2006
Front Low #CHFL-15
Front Superlow #CHFL-15L
Rear Lowering Blocks 38mm (1.5″) tall #LB225
Rear Lowering Blocks 50mm (2.0″) tall #LB226

Holden Commodore Ute VE 6 & 8 cyl. Ute load carrying option 2007-2013
NOTE: Fit short shocks when using these coils. Part number 35-0653 or equivalent
Front Low #CHFL-96
Front Superlow #CHFL-96L
Rear Low #CHRL-97H
Rear Superlow #CHRL-97LH

Holden Commodore Ute VE 6 & 8 cyl. Ute 2007-2013
Front Low #CHFL-96
Front Superlow #CHFL-96L
Rear Low #CHRL-97
Rear Superlow #CHRL-97L

Holden Commodore Ute VE 6 & 8 cyl. Ute flatter stance for more even sill rake option 2007-13
Front Low #CHFL-96
Rear Superlow #CHRL-97L

Holden Commodore Ute VF 6 & 8 cyl. Ute load carrying option 2013-2016
NOTE: Fit short shocks when using these coils. Part number 35-0653 or equivalent.
Front Low #CHFL-275
Front Superlow #CHFL-275L
Rear Low #CHRL-277
Rear Superlow #CHRL-277L

Holden Commodore Ute VF 6 & 8 cyl. ute Flatter stance for more even sill rake option 2013-2016
Front Low #CHFL-275
Rear Low #CHRL-276L

Holden Commodore Ute VF 6 & 8 cyl. ute 2013-2016
Front Low #CHFL-275
Front Superlow #CHFL-275L
Rear Low #CHRL-276
Rear Superlow #CHRL-276L

Additional information

Front Lowering Spring Options

NO FRONT SPRINGS, CHFL-14, CHFL-15, CHFL-15L, CHFL-18, CHFL-20, CHFL-96, CHFL-96L, CHFL-275, CHFL-275L
Rear Lowering Spring Options

NO REAR SPRINGS, CHRL-23, CHRL-23H, CHRL-23L, CHRL-86, CHRL-87, CHRL-97, CHRL-97H, CHRL-97L, CHRL-97LH, CHRL-213, CHRL-214, CHRL-214H, CHRL-276, CHRL-276L, CHRL-277, CHRL-277L, LB225, LB226

Related products