Nissan Pulsar & Sentra Lowering Springs

$299.90 – $599.80

Cobra Lowering Springs to fit Nissan Pulsar & Sentra (see below for model fitment)

Cobra Lowering springs will approximately drop 30-35mm below standard height.

Quantity
SKU: N/A Category: Tags: , , , , , , , , ,

Description

Nissan Pulsar & Sentra Cobra Lowering Springs

Nissan Pulsar & Sentra N12, B11 Models 1982-1987
Front Low #CNFL-215
Rear Low #CNRL-19

Nissan Pulsar & Sentra N13 Models 1987-1989
NOTE: REAR Use this part number in models to 7/89 with O.E strut number J7500 only. If O.E struts have been replaced measure length of strut tube from spring seat to top of flange mount. J7500 = 138mm. If measurement is 160mm use part numbers CNRL-234
Front Low #CNFL-233
Rear Low #CNRL-233
Rear Low #CNRL-234

Nissan Pulsar & Sentra N13 EXA 2 Door 1987-1989
NOTE: REAR Use this part number in models to 7/89 with O.E strut number J7500 only. If O.E struts have been replaced measure length of strut tube from spring seat to flange mount. J7500 = 138mm. If measurement is 160mm use part numbers CNRL-237. Shock modification may be required to retain low coils at full extension
Front Low #CNFL-237
Rear Low #CNRL-266
Rear Low #CNRL-237

Nissan Pulsar & Sentra N13 Models 1989-1991
NOTE: REAR Use this part number in models 7/89 on with O.E strut number J7501 only. If O.E struts have been replaced measure length of strut tube from spring seat to flange mount. J7501 = 160mm. If measurement is 138mm use part numbers CNRL-233
Front Low #CNFL-233
Rear Low #CNRL-234
Rear Low #CNRL-233

Nissan Pulsar & Sentra N13 EXA 2 Door 1989-1991
NOTE: REAR Use this part number in models 7/89 on with O.E strut number J7501 only. If O.E struts have been replaced measure length of strut tube from spring seat to flange mount. J7501 = 160mm. If measurement is 138mm use part numbers CNRL-266. Shock modification may be required to retain low coils at full extension.
Front Low #CNFL-237
Rear Low #CNRL-237
Rear Low #CNRL-266

Nissan Pulsar & Sentra Y10 Wagon 1990-on
Front Low #CNFL-238
Rear Low #CNRL-269

Nissan Pulsar & Sentra N14 Models 1992-1995
Front Low #CNFL-236
Rear Low #CNRL-236

Nissan Pulsar & Sentra N14 GTIR 4 x 4 1992-1995
Front Low #CNFL-235
Rear Low #CNRL-235

Nissan Pulsar & Sentra N15, B14 Models 1995-2000
NOTE 1: Identify FRONT by measuring distance from lower clevis hole to bottom of spring.
NOTE 2: Measure REAR coil lower inside diameter
Front Low #CNFL-217 = 216mm
Front Low #CNFL-218 = 246mm
Rear Low #CNRL-217 = 77mm Lower Inside Diameter
Rear Low #CNRL-218 = 65mm Lower Inside Diameter

Nissan Pulsar & Sentra N15 4WD 1995-2000
Front Low #CNFL-303
Rear Low #CNRL-303

Nissan Pulsar & Sentra Y11 Wagon with non IRS rear 1998-on
Front Low #CNFL-304
Rear Low #CNRL-239

Nissan Pulsar & Sentra N16, B15 Sedan 2000-on
Front Low #CNFL-51
Rear Low #CNRL-51

Nissan Pulsar & Sentra N16, B15 Hatch 2000-on
Front Low #CNFL-51
Rear Low #CNRL-268

Additional information

Front Lowering Spring Options

NO FRONT SPRINGS, CNFL-51, CNFL-215, CNFL-217, CNFL-218, CNFL-233, CNFL-235, CNFL-236, CNFL-237, CNFL-238, CNFL-303, CNFL-304
Rear Lowering Spring Options

NO REAR SPRINGS, CNRL-19, CNRL-51, CNRL-217, CNRL-218, CNRL-233, CNRL-234, CNRL-235, CNRL-236, CNRL-237, CNRL-239, CNRL-266, CNRL-268

Related products