Showing 1–15 of 33 results

  • GFB Hybrid BOV NZ

    GFB Hybrid Blow Off Valve

    $369.00$669.00

    Known as the “Hybrid”, this world-first became the flagship model of the newly formed company Go Fast Bits. The two venting ports of this revolutionary valve were staged on the body such that the recirc port opened before the atmo port, helping to prevent backfiring and stalling on cars with a MAF sensor, whilst still giving the signature blow off sound when the car is driven harder.

    Select options This product has multiple variants. The options may be chosen on the product page
  • GFB Respons BOV NZ

    GFB Respons Blow Off Valve

    $435.00$825.00

    On the surface, the GFB Respons BOV look like just another dual-port blow-off valve, but the GFB Respons is actually much more than that. Featuring GFB’s patented venting bias adjustment system, the GFB Respons allows you to precisely control how much air vents from each of the two outlets.

    Select options This product has multiple variants. The options may be chosen on the product page
  • GFB DV+ Diverter Valve NZ GFB T9351 T9301 T9352 T9355 T9354 T9356 T9357 T9358 T9359 T9360 T9366 T9362 T9363

    GFB DV+ Diverter Valves

    $229.00$319.00

    GFB’s DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles.

    By retaining the factory ECU control and recirculating the vented air, the GFB DV+ is a purely performance-oriented product that offers the following benefits:

    • Sharper throttle response
    • Faster boost recovery on gearshift
    • Solves boost leaking issues
    • Built to last
    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Ford Falcon & Fairmont 6 Cyl Lowering Springs

    $199.90$599.90

    Cobra Lowering Springs to fit Ford Falcon & Fairmont 6 Cyl (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height*
    Some Ford Falcon’s will only lower 20-25mm if this is an issue please contact us before ordering and we can check if this applies to your vehicle

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Ford Cortina Lowering Springs

    $199.90$649.80

    Cobra Lowering Springs to fit Ford Cortina (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Manifold vacuum Block
    -8%

    Manifold Vacuum Block – PRO Racing

    Original price was: $59.90.Current price is: $54.90.

    Manifold Vacuum Block – PRO Racing

    Universal boost/manifold vacuum block made of high quality CNC machined T6061 billet aluminum. This product is suitable for connecting pressurised controllers, instruments and any components that require a separate vacuum source.

    Add to cart
  • Ford Ranger PX Series Intercooler Hose (Cold Side)

    $144.90

    Ford Ranger PX Series & Mazda BT50 3.2L Intercooler Hose (Cold Side – Throttle Body to Intercooler)

    • Direct Replacement
    • 1 Year Warranty
    • Quality Product
    • Comes with Hose Clamps
    Add to cart
  • GFB VTA with Solenoid
    T9489

    GFB VTA with Solenoid

    $365.00$385.00

    The GFB VTA shares the successful DV+ design philosophy: (GFB VTA DV+ BOV in one)

    “Keep what works, replace what doesn’t”

    Key features:

    • TMS Technology for faster boost recovery on gearshift and during throttle modulation
    • Improved boost holding ability
    • Atmosphere venting for blow-off sound
    • Retains ECU control
    • Includes Replacement Solenoid
    • Simple, direct bolt-on kits include everything you need to install
    • Manufactured in Australia in accordance with ISO 9001
    Select options This product has multiple variants. The options may be chosen on the product page
  • GFB WGA Wastegate Actuator WRX
    GFB WGA XR6 7306 NZ

    Wastegate Actuator XR6 – GFB WGA 7306

    $265.00

    Wastegate Actuator XR6 – GFB WGA 7306

    The GFB WGA Wastegate Actuator XR6 is a high performance internal wastegate actuator designed to improve boost control on internally wastegated turbos. By using a significantly larger diaphragm area than the OEM actuator, the WGA has more control authority over the wastegate flap, meaning exhaust backpressure cannot override the flap position as easily, resulting in more stable and reliable boost control.

    Supplied with 3 springs and a unique turnbuckle pre-load adjustment, the base boost pressure can be configured and adjusted from 5psi to 24psi for the best possible boost control.

    The WGA features a longer stroke, shorter height, and more adjustment than its rivals.

    WGA part # 7306 is designed to bolt on to Ford XR6 turbo models. The 5psi and 7psi springs are installed for a base pressure of 12psi, and the 10psi spring is included in the packaging for further tuning options.

    Please note that whilst this is a physical “bolt-on” product, it should be considered a tuning tool as it WILL increase boost pressure and therefore TUNING IS REQUIRED.

    Add to cart
  • Ford Ranger PX, PXII & PXIII 3.2L Brakes

    $84.90$1,014.60

    RDA’s GP MAX Brake Pads are one of the most advanced general purpose brake pads on the market. GP MAX will deliver great stopping power, responsive pedal feel and long service life for general purpose applications.

    RDA’s Phantom Brake Pads use the latest ceramic fiber technology and composition for low dust and quieter operation, giving a responsive pedal from cold to 550°C. Phantom brake pads are suitable for general purpose everyday driving while being right at home in performance street vehicles providing less fade at higher temperatures.

    RDA Brakes Extreme Brake Pads are a heavy duty copper free, dense semi metallic pad designed specifically for frequent or heavy duty braking. RDA Brakes Extreme will deliver consistent pedal feel and long service life in temperatures ranging from cold to 600°C.

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Ford Telstar & TX5 Lowering Springs

    $299.90$699.80

    Cobra Lowering Springs to fit Ford Telstar & TX5 (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height.

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Ford Mondeo Lowering Springs

    $299.90$699.80

    Cobra Lowering Springs to fit Ford Mondeo (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height.

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Ford Escort Lowering Springs

    $199.90$499.80

    Cobra Lowering Springs to fit Ford Escort (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height.

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Ford Laser Lowering Springs

    $299.90$599.80

    Cobra Lowering Springs to fit Ford Laser (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height.

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Ford Falcon Ute & Panelvan Lowering Springs

    $199.90$499.80

    Cobra Lowering Springs to fit Ford Falcon Ute & Panelvan (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height*
    Some Ford Falcon’s will only lower 20-25mm if this is an issue please contact us before ordering and we can check if this applies to your vehicle

    Select options This product has multiple variants. The options may be chosen on the product page