Mitsubishi Lancer & Cedia Sedan Lowering Springs
$199.90 – $649.80
Cobra Lowering Springs to fit Mitsubishi Lancer & Cedia Sedan (see below for model fitment)
Cobra Lowering springs will approximately drop 30-35mm below standard height*
Cobra Superlow Lowering Springs will approximately drop 40-45mm below standard height.
Superlow coils may lower vehicle under 100mm ground clearance depending on wheel & tyre diameter. Certification will be required if this is the case.
Description
Description
Mitsubishi Lancer & Cedia Sedan Cobra Lowering Springs
Mitsubishi Lancer LA (round headlight) 1974-1977
NOTE: Front may require short shock or modification to retain coils at full extension
Front Low #CCFL-214
Rear Lowering Blocks 38mm (1.5″) tall #LB435/1
Rear Lowering Blocks 50mm (2.0″) tall #LB435
Mitsubishi Lancer LB-EX (square headlight) 1977-1981
NOTE: Front measure inside diameter of original FRONT coils before ordering. Part numbers vary in same model.
CCFL-251 = 96mm, CCFL-254 = 116mm.
Front Low #CCFL-251 (96mm I.D front coils)
Front Low #CCFL-254 (116mm I.D front coils)
Rear Low #CCRL-253
Mitsubishi Lancer C5-, C6-, C7-, C8- 1988-1992
NOTE: Front measure inside diameter of original FRONT coils before ordering. Part numbers vary in same model.
CCFL-27 = 145mm, CCFL-28 = 121mm.
Front Low #CCFL-27 (145mm I.D front coils)
Front Low #CCFL-28 (121mm I.D front coils)
Rear Low #CCRL-27
Mitsubishi Lancer CD5A, CD9A GSR 4WD firmer rated rear coil option 1992-1996
NOTE 1: Advisable to measure original FRONT coils before ordering. CCFL-29 = 140mm I.D
NOTE 2: Rear will require short struts or modification to retain coils at full extension
Front Low #CCFL-29
Front Superlow #CCFL-29L
Rear Low #CCRL-28H
Rear Superlow #CCRL-30H
Mitsubishi Lancer CD5A, CD9A GSR 4WD 1992-1996
NOTE: Advisable to measure original FRONT coils before ordering. CCFL-29 = 140mm I.D
Front Low #CCFL-29
Front Superlow #CCFL-29L
Rear Low #CCRL-28
Rear Superlow #CCRL-30
Mitsubishi Lancer CA, CB, CC 1992-1996
NOTE: Front measure inside diameter of original FRONT coils before ordering. Part numbers vary in same model.
CCFL-27 = 145mm, CCFL-28 = 121mm.
Front Low #CCFL-27
Front Superlow #CCFL-27L
Front Low #CCFL-28
Front Superlow #CCFL-28L
Rear Low #CCRL-28
Rear Superlow #CCRL-30
Mitsubishi Lancer LJ, CK, CM 1996-2002
NOTE: Front measure inside diameter of original FRONT coils before ordering. Part numbers vary in same model.
CCFL-27 = 145mm, CCFL-28 = 121mm.
Front Low #CCFL-27
Front Superlow #CCFL-27L
Front Low #CCFL-28
Front Superlow #CCFL-28L
Rear Low #CCRL-30
Rear Superlow #CCRL-30L
Mitsubishi Lancer CM5A GSR 4WD 1996-2002
NOTE: Advisable to measure original FRONT coils before ordering. CCFL-29 = 140mm I.D
Front Low #CCFL-29
Front Superlow #CCFL-29L
Rear Low #CCRL-227
Rear Superlow #CCRL-227L
Mitsubishi Sedan Lancer / Cedia (excl. VRX) with 124mm I.D front coil 2000-2007
NOTE: Advisable to measure original FRONT coils before ordering. CCFL-51 = 124mm I.D
Front Low #CCFL-51
Front Superlow #CCFL-51L
Rear Low #CCRL-51
Rear Superlow #CCRL-51L
Mitsubishi Lancer CG,CH, CS / Cedia (including VRX) with 140mm I.D front coil 2002-2007
NOTE: Advisable to measure original FRONT coils before ordering. CCFL-43 = 140mm I.D
Front Low #CCFL-43
Rear Low #CCRL-51
Additional information
Additional information
| Front Lowering Spring Options | NO FRONT SPRINGS, CCFL-27, CCFL-27L, CCFL-28, CCFL-28L, CCFL-29, CCFL-29L, CCFL-43, CCFL-51, CCFL-51L, CCFL-214, CCFL-251, CCFL-254 |
|---|---|
| Rear Lowering Spring Options | NO REAR SPRINGS, CCRL-27, CCRL-28, CCRL-28H, CCRL-30, CCRL-30H, CCRL-51, CCRL-51L, CCRL-227, CCRL-227L, CCRL-253, LB435/1, LB435 |
