- ( 0 Customer Review )
Walbro Intank Fuel Pump 465lph/900hp E85 Compatible
The Walbro Intank Fuel Pump is designed for high horsepower turbo applications running ethanol blended fuels (E85 etc). It outperforms all other intank fuel pumps on the market. The power level supported by this pump will vary depending on the concentration of ethanol being used, but as a general rule, it is recommend for ethanol based applications making in excess of 400hp at the wheels.
Out of stock
Note: The Walbro Intank Fuel Pump 465 LPH unit flows large amounts of fuel, some factory fuel lines and fuel pump wiring may need upgrading when using this pump due to the volume of fuel that this pump flows!
Includes universal fitting kit.
The Walbro Intank Fuel Pump 465 LPH fuel pump is often a simple drop-in install for many vehicles although others require minor modifications to the fuel pump cradle and/or pre filter due to the larger 50mm base, this is a benefit when wanting to use your original fuel tank but upgrade to the fuel pump to Run E85.
-OD (large): 50mm
-OD (small): 39mm
-Flow rate: 465 LPH @ 40PSI & 13.5 Volts, 360LPH @ 120PSI & 13.5V
-Current draw: 13-18A depending on pressure/voltage
Features and benefits:
-Cost effective upgrade to your fuel system
-Designed to fit inside your factory fuel pump cradle with no or little modification
-Rated to flow 465 litres per hour at 13.5V
-Comes with universal fitting kit
-Compatible with ethonal fuels and MTBE based fuels
Genuine Walbro item. Made in USA
NOTE: THE WALBRO F90000274 AND F90000267 FUEL PUMP FLOW RATES AND PHYSICAL DIMENSIONS ARE IDENTICAL. THE WALBRO F90000274 SIMPLY HAS A DIFFERENT INTERNAL RELIEF VALVE PERMITTING HIGHER FUEL PRESSURES.
“Please take note these Walbro 465lph Fuel Pumps are meant for modified vehicles with over 500HP, vehicles in which these fuel pumps are to be installed in should have upgraded supply and return fuel lines, upgraded pump wiring to support the amp draw, and upgrades to the vehicles fuel pressure regulator. This 465lph Walbro Fuel Pump in NOT meant for use in a stock or lightly modified vehicle with less than 500HP, the use of this fuel pump in that type of application will result in severe drivability issues and/or damage to the vehicle.”