Show filter
Showing 421–435 of 914 results
-
JB Weld Muffler Seal Cement
$23.00Features
- Temp resistance: 454ºC
- Set time: 30 min
- Cure time:2 hours
- use on Mufflers and tailpipes
-
JB Weld Tiger Patch 5cm x 91cm
$26.00Features
- Primary Applications: Sealing holes and cracks.
- Use on Mufflers and tailpipes
- Temp resistance: 315ºC
- Cure time 20 minutes (with heat)
-
JB Weld Ultimate Black Silicone
$25.00Features
- Oxime Room Temperature Vulcanisation
- 100% Silicone
- Maximum oil resistance
- Set time 1 hour
- Temperature resistant up to 260 degrees C
- Low odour and sensor safe
-
JB Weld Ultimate Black Silicone 280ml cartridge
$51.00Features
- Oxime Room Temperature Vulcanisation
- 100% Silicone
- Maximum oil resistance
- Set time 1 hour
- Temperature resistant up to 260 degrees C
- Low odour and sensor safe
-
JB Weld Perma-Lock Blue Medium Strength Threadlocker
$34.00Features
- Medium strength thread locker
- Ideal for fastener applications requiring easy disassembly with hand tools
-
JB Weld WaterWeld Epoxy Putty Stick
$33.00Features
- After curing, it can be drilled, tapped, filed, sanded and painted
- Set time of 15-25 minutes and sets hard in one hour
- Cures to an off-white colour
- Rated at a tensile strength of 900 PSI
- Will withstand temperatures up to 148 degrees C
- Certified by NSF as ‘Drinking Water Safe’
-
JB Weld Clear RTV Silicone Sealant
$28.00Features
- Room Temperature Vulcanisation, all purpose technology
- Set time 1 hour
- Fully cures in 24 hours
- Waterproof
-
JB Weld ExtremeHeat Paste
$31.00Features
- Metallic compound
- Can be drilled, machined or sanded once fully cured
- Water based
- Non-flammable
- Contains no solvents or Volatile Organic Compounds (VOC’s)
-
JB Weld PlasticWeld Epoxy Adhesive Syringe Mixer
$35.00Features
- Two-part adhesive and epoxy filler
- 1:1 mixing ratio
- Sets in 5 minutes at room temperature
- Fully cures in 1 hour
- Tensile strength of 4400 PSI
- Cures to a translucent yellow colour
-
JB Weld Black Plastic Bonder Urethane Adhesive Syringe Mixer
$39.00Features
- Quick setting, two-part urethane adhesive
- 1:1 mixing ratio
- Sets in 15 minutes
- Can be sanded after 30 minutes
- Tensile strength of 3770 PSI
- Cures to a hard, permanent bond
- Black colour
-
JB Weld ClearWeld Epoxy Adhesive Syringe Mixer
$25.00Features
- Designed to cure with a clear, transparent bond when used at thicknesses of less than 15mm
- 1:1 mixing ratio
- Sets in 5 minutes and will fully cure overnight
- Tensile strength of 3200 PSI
- Sets to a hard, permanent bond
-
JB Weld SteelStik Epoxy Putty Stick
$33.00Features
- Sets in 3-5 minutes
- After 60 minutes it can be drilled, tapped, machined, ground, filed and painted
- Cures to a dark grey colour
- Rated at a tensile strength of 900 PSI
- Will withstand temperatures up to 148C
- Certified by NSF as ‘Drinking Water Safe’
-
JB Weld Original Cold-Weld Epoxy Adhesive Syringe Mixer
$31.00Features
- 1:1 mixing ratio
- Forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing
- At room temperature, J-B Weld sets in 20-25 minutes to a dark grey colour
- Full cure is reached in 15 – 24 hours
- Has a tensile strength of 3960 PSI
- Can withstand temperatures up to 287 degrees C when fully cured.
-
JB Weld Ultimate Grey Silicone
$26.00Features
- Gasket maker and sealant
- Oxime Room Temperature Vulcanisation
- 100% Silicone
- Suitable for high torque load applications
- Maximum oil resistance
- Set time 1 hour
- Temperature resistant up to 260 degrees C
- Low Odour, non-corrosive and sensor safe
