grid button list button

Showing 421–435 of 914 results

  • JB Weld Muffler Seal Cement

    $23.00
    Features
    • Temp resistance: 454ºC
    • Set time: 30 min
    • Cure time:2 hours
    • use on Mufflers and tailpipes
    Add to cart

  • JB Weld Tiger Patch 5cm x 91cm

    $26.00
    Features
    • Primary Applications: Sealing holes and cracks.
    • Use on Mufflers and tailpipes
    • Temp resistance: 315ºC
    • Cure time 20 minutes (with heat)
    Add to cart

  • JB Weld Ultimate Black Silicone

    $25.00
    Features
    • Oxime Room Temperature Vulcanisation
    • 100% Silicone
    • Maximum oil resistance
    • Set time 1 hour
    • Temperature resistant up to 260 degrees C
    • Low odour and sensor safe
    Add to cart

  • JB Weld Ultimate Black Silicone 280ml cartridge

    $51.00
    Features
    • Oxime Room Temperature Vulcanisation
    • 100% Silicone
    • Maximum oil resistance
    • Set time 1 hour
    • Temperature resistant up to 260 degrees C
    • Low odour and sensor safe
    Add to cart

  • JB Weld Perma-Lock Blue Medium Strength Threadlocker

    $34.00
    Features
    • Medium strength thread locker
    • Ideal for fastener applications requiring easy disassembly with hand tools
    Add to cart

  • JB Weld WaterWeld Epoxy Putty Stick

    $33.00
    Features
    • After curing, it can be drilled, tapped, filed, sanded and painted
    • Set time of 15-25 minutes and sets hard in one hour
    • Cures to an off-white colour
    • Rated at a tensile strength of 900 PSI
    • Will withstand temperatures up to 148 degrees C
    • Certified by NSF as ‘Drinking Water Safe’
    Add to cart

  • JB Weld MarineWeld Epoxy Twin Pack

    $25.00
    Add to cart

  • JB Weld Clear RTV Silicone Sealant

    $28.00
    Features
    • Room Temperature Vulcanisation, all purpose technology
    • Set time 1 hour
    • Fully cures in 24 hours
    • Waterproof
    Add to cart

  • JB Weld ExtremeHeat Paste

    $31.00
    Features
    • Metallic compound
    • Can be drilled, machined or sanded once fully cured
    • Water based
    • Non-flammable
    • Contains no solvents or Volatile Organic Compounds (VOC’s)
    Add to cart

  • JB Weld PlasticWeld Epoxy Adhesive Syringe Mixer

    $35.00
    Features
    • Two-part adhesive and epoxy filler
    • 1:1 mixing ratio
    • Sets in 5 minutes at room temperature
    • Fully cures in 1 hour
    • Tensile strength of 4400 PSI
    • Cures to a translucent yellow colour
    Add to cart

  • JB Weld Black Plastic Bonder Urethane Adhesive Syringe Mixer

    $39.00
    Features
    • Quick setting, two-part urethane adhesive
    • 1:1 mixing ratio
    • Sets in 15 minutes
    • Can be sanded after 30 minutes
    • Tensile strength of 3770 PSI
    • Cures to a hard, permanent bond
    • Black colour
    Add to cart

  • JB Weld ClearWeld Epoxy Adhesive Syringe Mixer

    $25.00
    Features
    • Designed to cure with a clear, transparent bond when used at thicknesses of less than 15mm
    • 1:1 mixing ratio
    • Sets in 5 minutes and will fully cure overnight
    • Tensile strength of 3200 PSI
    • Sets to a hard, permanent bond
    Add to cart

  • JB Weld SteelStik Epoxy Putty Stick

    $33.00
    Features
    • Sets in 3-5 minutes
    • After 60 minutes it can be drilled, tapped, machined, ground, filed and painted
    • Cures to a dark grey colour
    • Rated at a tensile strength of 900 PSI
    • Will withstand temperatures up to 148C
    • Certified by NSF as ‘Drinking Water Safe’
    Add to cart

  • JB Weld Original Cold-Weld Epoxy Adhesive Syringe Mixer

    $31.00
    Features
    • 1:1 mixing ratio
    • Forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing
    • At room temperature, J-B Weld sets in 20-25 minutes to a dark grey colour
    • Full cure is reached in 15 – 24 hours
    • Has a tensile strength of 3960 PSI
    • Can withstand temperatures up to 287 degrees C when fully cured.
    Add to cart

  • JB Weld Ultimate Grey Silicone

    $26.00
    Features
    • Gasket maker and sealant
    • Oxime Room Temperature Vulcanisation
    • 100% Silicone
    • Suitable for high torque load applications
    • Maximum oil resistance
    • Set time 1 hour
    • Temperature resistant up to 260 degrees C
    • Low Odour, non-corrosive and sensor safe
    Add to cart