Show filter
Showing 31–39 of 39 results
-
JB Weld SteelStik Epoxy Putty Stick
$33.00Features
- Sets in 3-5 minutes
- After 60 minutes it can be drilled, tapped, machined, ground, filed and painted
- Cures to a dark grey colour
- Rated at a tensile strength of 900 PSI
- Will withstand temperatures up to 148C
- Certified by NSF as ‘Drinking Water Safe’
-
JB Weld Original Cold-Weld Epoxy Adhesive Syringe Mixer
$31.00Features
- 1:1 mixing ratio
- Forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing
- At room temperature, J-B Weld sets in 20-25 minutes to a dark grey colour
- Full cure is reached in 15 – 24 hours
- Has a tensile strength of 3960 PSI
- Can withstand temperatures up to 287 degrees C when fully cured.
-
JB Weld Ultimate Grey Silicone
$26.00Features
- Gasket maker and sealant
- Oxime Room Temperature Vulcanisation
- 100% Silicone
- Suitable for high torque load applications
- Maximum oil resistance
- Set time 1 hour
- Temperature resistant up to 260 degrees C
- Low Odour, non-corrosive and sensor safe
-
JB Weld Autoweld Epoxy Putty Stick
$21.00Features
- Petroleum, ethanol and chemical resistant
- Sets in 5 minutes
- Cures in 1 hour, to a dark grey colour
- Rated at a tensile strength of 900 PSI
- Certified by NSF as ‘Drinking Water Safe’
-
JB Weld HighHeat Epoxy Putty Stick
$33.00Features
- Cures to a tough, hard bond with little to no shrinkage
- Industrial strength
- Sets in 1 hour at room temperature
- After 8 hours, it can be drilled, tapped, machined, ground, filed and painted
- Is rated at a tensile strength of 800 PSI
- Cures to a machine grey in colour
- Outperforms conventional epoxy putties at high temperatures
- Is able to withstand continuous heat exposure of 204 degrees C and intermittent heat exposure to 287 degrees C
-
JB Weld High Temp Red Silicone 85g
$25.00Features
- Room Temperature Vulcanisation, all purpose technology
- Set time 1 hour
- Sensor safe
- Temperature resistant up to 343 degrees C
-
JB Weld Black Silicone 85g
$21.00Features
- Room Temperature Vulcanisation, all purpose technology
- Set time 1 hour
- Fully cures in 24 hours
- Mold and mildew resistant
-
JB Weld RadiatorWeld Plastic Tank & Radiator Repair Kit
$40.00Features
- Can be used on cracks of 4 inch or less and holes up to 1/4 inch in diameter
- Kit contains epoxy putty, fiberglass cloth, sandpaper and applicator brush
-
JB Weld Original Cold Weld Epoxy Adhesive Twin Pack
$25.00Features
- Two part epoxy
- Mixed at a ratio of 1:1
- Forms a permanent bond and can be shaped, taped, filed, sanded and drilled after curing
- Sets in 4 – 6 hours at room temperature, and full cure is reached in 15 – 24 hours
- Cures to a dark grey colour
- Can withstand temperatures up to 287 degrees C when fully cured
- Tensile strength of 3960 PSI
