Showing 1–15 of 19 results
-
Intercooler Pipe – Straights
$33.90 – $51.90- High Quality Intercooler Tube
- Thickness 1.8mm & 2.0mm (2.5″ & under are 1.8mm – 2.75″ up are 2.0mm)
- Simple polish to allow ease of welding
- 600mm in Length
- Increase Air Flow Comparing with other Standard Piping
- Quality clamps available to suit our alloy intercooler pipe.
- Material: T-6061 Aluminium
Select options This product has multiple variants. The options may be chosen on the product page -
V-Band Flange & Clamp Sets
$48.90 – $142.90Sizes Available: (ID Measurements)
- 1.5″ (38mm) V-Band Clamp & Flange Set
- 1.75″ (44mm) V-Band Clamp & Flange Set
- 2″ (51mm) V-Band Clamp & Flange Set
- 2.25″ (57mm) V-Band Clamp & Flange Set
- 2.5″ (63mm) V-Band Clamp & Flange Set
- 2.75″ (70mm) V-Band Clamp & Flange Set
- 3″ (76mm) V-Band Clamp & Flange Set
- 3.25″ (83mm) V-Band Clamp & Flange Set
- 3.5″ (89mm) V-Band Clamp & Flange Set
- 4″ (102mm) V-Band Clamp & Flange Set
- 5″ (127mm) V-Band Clamp & Flange Set
- 6″ (150mm) V-Band Clamp & Flange Set
Select options This product has multiple variants. The options may be chosen on the product page -
Oil Filter Sandwich Sensor Plate
$49.90This sandwich plate comes with 2 block off plugs and 4 center bolt fittings as below.
– 3/4″ x 16UNF
– M20 x 1.5
– M22 x 1.5
– M18 x 1.5
– Seal Size 73.5mm OD x 59mm ID -
Throttle Bodies 70mm, 80mm & 90mm
$199.00 – $229.00*STOCK CLEARANCE*
30% off the RRP on the 90mm Throttle Body NOW! save $75
Universal 70mm, 80mm or 90mm Billet Throttle Body complete with weld on adaptor plate.
- Oversized throttle body for greater throttle response and better air flow
- Precision CNC machined 6061 T6 Billet Aluminium
- Nissan VQ35TPS
- Fits most aftermarket Intake manifolds but also comes with a weld on adaptor plate
Select options This product has multiple variants. The options may be chosen on the product page -
T25/T3 Turbo Beanie
$129.00 – $149.00Select options This product has multiple variants. The options may be chosen on the product page -
Alloy Intercooler Pipe 180 Degree
$42.90 – $59.90Alloy Intercooler Pipe 180 DegreePRO Racing Alloy Intercooler Pipe (180 Degree) is quality mandrel bent piping with beaded flared ends to stop the silicone joiners coming off under boost pressure.
Select options This product has multiple variants. The options may be chosen on the product page -
PRO Racing Oil Filter Relocation Kit
Original price was: $144.90.$119.90Current price is: $119.90. -
Surge Tank & Single Bracket
$174.90Surge Tank SPECS:
3X AN6 FITTINGS FOR RETURN LINES
1X AN10 FUEL PUMP FITTING (easily stepped down to AN8 or AN6 if needed)
SUIT Walbro 550hp External or BOSCH 044 FUEL PUMPS or SIMILAR
170mmH x 170mmW x 70mm D
BASE 190mm
-
T6 Turbo Beanie
$199.00The Lava Rock T6 Turbo Beanie will fit most larger turbos, beanie size is roughly 345mm height, opened bottom length 295mm, 200mm depth & comes with springs for securing.
-
-
PRO Racing One Way Check Valves
$39.90Select options This product has multiple variants. The options may be chosen on the product page -
Surge Tank 2.5ltr Single Pump
$119.00If you’re setting up your car to run in any motorsport division like Drift, Track, Rally, Drag…. you’ll need to fit a fuel surge tank at some stage to avoid fuel feed problems, especially during hard cornering.
-
Dual Pump Surge tank 5ltr Set Up with Filter
$319.90Surge Tank SPECS:
3X AN6 FITTINGS FOR RETURN LINES
2X AN10 FUEL PUMP FITTINGS (easily stepped down to AN8 if needed)
SUIT DUAL BOSCH 044 FUEL PUMPS or SIMILAR
1x High Flow Inline Filter
130mmH x 180mmW x 145mmD
BASE 230mmW x 450mmL
