Showing 1–15 of 712 results
-
VHT Engine Enamel Paint
$31.90VHT Engine Enamel Paint is available in a wide range of colours, including exact match factory colours. All colours have excellent durability and superior heat and chemical resistance. They are specially formulated to withstand corrosion, rust, salt spray, chemicals and additives of today’s gasoline blends and degreasers. VHT 550°F (288°C)
Select options This product has multiple variants. The options may be chosen on the product page -
Silicone End Caps
$11.90 – $18.90Silicone Blanking End Cap 4 ply, 5mm thick, Motorsport Quality Silicone.
*Colour: Black
Silicone hoses are measured by the inside diameter
Huge Range Available including:
4mm (5/32″)
6mm (1/4″)
8mm (5/16″)
10mm (3/8″)
12mm (1/2″)
16mm (5/8″)
19mm (3/4″)
25mm (1″)
28mm (1 1/8″)
30mm (1 3/16″)
32mm (1 1/4″)
38mm (1 1/2″)
40mm (1 37/64″)
45mm (1 3/4″)Select options This product has multiple variants. The options may be chosen on the product page -
VHT Wheel Paint NZ
$29.90 – $31.90VHT Wheel Paint provides a durable, glossy long lasting finish. These coatings will protect your wheels and resist fading, chipping, chemicals, heat, weather & corrosion. Withstands intermittent temperatures up to 121°C. Ideal for aluminium wheels, steel wheels, plastic hubcaps and center caps
Select options This product has multiple variants. The options may be chosen on the product page -
T Bolt Clamps for Silicone Hose
$6.50 – $8.90Select options This product has multiple variants. The options may be chosen on the product page -
Bosch 6PK Multi Rib Belt
$34.90 – $199.90Multi Rib Belts from Bosch guarantee outstanding reliability and a long service life, despite considerable loading. Being wearing parts, they should therefore be checked and replaced at the recommended intervals.
Select options This product has multiple variants. The options may be chosen on the product page -
VHT Vinyl Dye
$31.90VHT Vinyl Dye™ for vinyl and carpeting restores or changes the color of any vinyl upholstery, seats and trim, or the “short nap” carpeting found in today’s cars, boats and watercraft. It is ideal for use on stiff or pliable vinyl, simulated leather or plastic. It is extremely resistant to cracking or fading. Careful preparation is essential and all traces of dirt, silicone products, vinyl and rubber protectants, oils and greases must be removed. Incomplete preparation will not produce a satisfactory result.
Select options This product has multiple variants. The options may be chosen on the product page -
VHT Flameproof Paint
$40.90Select options This product has multiple variants. The options may be chosen on the product page -
Silicone Hose Straight Reducer
$24.90 – $49.90Our PRO Racing Silicone Hose Straight Reducer is a high quality 4ply Silicone Hose product that is suitable for all types of applications where durability and quality is important for your performance street car or dedicated track,drag or rally car.
Straight Silicone Reducing hoses are available in the following sizes:
- 16mm-13mm Straight Reducer (5/8″-1/2″)
- 19mm-13mm Straight Reducer (3/4″-1/2″)
- 19mm-16mm Straight Reducer (3/4″-5/8″)
- 22mm-16mm Straight Reducer (7/8″-5/8″)
- 22mm-19mm Straight Reducer (7/8″-3/4″)
- 25mm-16mm Straight Reducer (1″-5/8″)
- 25mm-19mm Straight Reducer (1″-3/4″)
- 28mm-22mm Straight Reducer (1 1/8″-7/8″)
- 28mm-25mm Straight Reducer (1 1/8″-1″)
- 32mm-25mm Straight Reducer (1 1/4″-1″)
- 32mm-28mm Straight Reducer (1 1/4″-1 1/8″)
- 35mm-25mm Straight Reducer (1 3/8″-1″)
- 35mm-28mm Straight Reducer (1 3/8″-1 1/8″)
- 35mm-32mm Straight Reducer (1 3/8″-1 1/4″)
- 38mm-22mm Straight Reducer (1 1/2″-7/8″)
- 38mm-25mm Straight Reducer (1 1/2″-1″)
- 38mm-28mm Straight Reducer (1 1/2″-1 1/8″)
- 38mm-32mm Straight Reducer (1 1/2″-1 1/4″)
- 38mm-35mm Straight Reducer (1 1/2″-1 3/8″)
- 40mm-35mm Straight Reducer (1 5/8″-1 3/8″)
- 45mm-32mm Straight Reducer (1 3/4″-1 1/4″)
- 45mm-38mm Straight Reducer (1 3/4″-1 1/2″)
- 51mm-38mm Straight Reducer (2″-1 1/2″)
- 51mm-45mm Straight Reducer (2″-1 3/4″)
- 54mm-51mm Straight Reducer (2 1/8″-2″)
- 57mm-51mm Straight Reducer (2 1/4″-2″)
- 60mm-51mm Straight Reducer (2 3/8″-2″)
- 63mm-45mm Straight Reducer (2 1/2″-1 3/4″)
- 63mm-51mm Straight Reducer (2 1/2″-2″)
- 63mm-57mm Straight Reducer (2 1/2″-2 1/4″)
- 70mm-51mm Straight Reducer (2 3/4″-2″)
- 70mm-57mm Straight Reducer (2 3/4″-2 1/4″)
- 70mm-60mm Straight Reducer (2 3/4″-2 3/8″)
- 70mm-63mm Straight Reducer (2 3/4″-2 1/2″)
- 76mm-51mm Straight Reducer (3″-2″)
- 76mm-57mm Straight Reducer (3″-2.25″)
- 76mm-60mm Straight Reducer (3″-2 3/8″)
- 76mm-63mm Straight Reducer (3″-2 1/2″)
- 76mm-67mm Straight Reducer (3″-2 5/8″)
- 76mm-70mm Straight Reducer (3″-2 3/4″)
- 80mm-70mm Straight Reducer (3 1/8″-2 3/4″)
- 80mm-76mm Straight Reducer (3 1/8″-3″)
- 83mm-76mm Straight Reducer (3 1/4″-3″)
- 90mm-76mm Straight Reducer (3 1/2″-3″)
- 90mm-80mm Straight Reducer (3 1/2″-3 1/8″)
- 95mm-89mm Straight Reducer (3 .75″-3.5″)
- 102mm-63mm Straight Reducer (4″-2.5″)
- 102mm-76mm Straight Reducer (4″-3″)
- 102mm-83mm Straight Reducer (4″-3 1/4″)
- 102mm-90mm Straight Reducer (4″-3 1/2″)
- 114mm-102mm Straight Reducer (4.5″ – 4″)
- 127mm-102mm Straight Reducer (5″-4″)
Select options This product has multiple variants. The options may be chosen on the product page -
VHT Caliper Paint
$45.90VHT Brake caliper, drum & rotor paint has been specifically designed for the custom detailing of brake components. It is heat resistant to 482°c and will not chip, crack, fake or rust even under extremes of operation or road conditions. It it easy to apply, dries quickly & chemical resistant. careful preparation is essential. Ideal for: Calipers, Drums & Rotors
Select options This product has multiple variants. The options may be chosen on the product page -
Redline Gear Oil
$32.90 – $279.90Redline Gear Oil
Redline Gear Oil is considered the leader in the manufacturing of Synthetic Oils & offer more than 100 quality products, including motor oils, gear oils, assembly lubes, fuel additives and our popular Water Wetter cooling additive for the automotive, motorcycle, marine and industrial markets
Select options This product has multiple variants. The options may be chosen on the product page -
180 Degree Silicone Elbow from 6.5mm (1/4″) – 102mm (4″)
$34.90 – $56.90PRO Racing 180 Degree Silicone Hose is a high quality 4ply Silicone Hose product that is suitable for all types of applications where durability and quality is important for your performance street car or dedicated track,drag or rally car.
Select options This product has multiple variants. The options may be chosen on the product page -
Camo Spray Paint Cans
$29.90This ultra-flat paint is non-reflective to provide the ultimate camouflage.
- Bonds to most plastics, PVC, hard vinyl, ceramic glass, wood, metal and wicker
- No sanding, no priming; ultra-flat, non-reflective colors
- Ideal for sporting and hunting equipment, decoys and more. Not for use on skin, hair or clothing
- Fully chip resistant in 7 days
Select options This product has multiple variants. The options may be chosen on the product page -
90 Degree Silicone Reducers
$35.90 – $52.90Our PRO Racing Silicone Hose is a high quality 4ply Silicone Hose product that is suitable for all types of applications where durability and quality is important for your performance street car or dedicated track,drag or rally car.
90 Degree Silicone Reducing Elbows are available in the following sizes:
- 25mm-16mm 90° Reducer (1″-5/8″)
- 25mm-19mm 90° Reducer (1″-3/4″)
- 32mm-25mm 90° Reducer (1 1/4″-1″)
- 35mm-25mm 90° Reducer (1 3/8″-1″
- 35mm-32mm 90° Reducer (1 3/8″-1 1/4″)
- 38mm-25mm 90° Reducer (1 1/2″-1″)
- 38mm-32mm 90° Reducer (1 1/2″-1 1/4″)
- 38mm-35mm 90° Reducer (1 1/2″-1 3/8″)
- 45mm-38mm 90° Reducer (1.75″-1 1/2″)
- 51mm-38mm 90° Reducer (2″-1 1/2″)
- 51mm-45mm 90° Reducer (2″-1 3/4″)
- 57mm-51mm 90° Reducer (2 1/4″-2″)
- 60mm-51mm 90° Reducer (2 3/8″-2″)
- 63mm-45mm 90° Reducer (2 1/2″-1.75″)
- 63mm-51mm 90° Reducer (2 1/2″-2″)
- 63mm-57mm 90° Reducer (2 1/2″-2.25″)
- 70mm-51mm 90° Reducer (2 3/4″-2″)
- 70mm-60mm 90° Reducer (2 3/4″-2 3/8″)
- 70mm-63mm 90° Reducer (2 3/4″-2 1/2″)
- 76mm-51mm 90° Reducer (3″-2″)
- 76mm-60mm 90° Reducer (3″-2 3/8″)
- 76mm-63mm 90° Reducer (3″-2 1/2″)
- 76mm-67mm 90° Reducer (3″-2 5/8″)
- 80mm-70mm 90° Reducer (3 1/8″-2 3/4″)
- 83mm-63mm 90° Reducer (3 1/4″-2 .5″)
- 83mm-76mm 90° Reducer (3.25″-3″)
- 89mm-63mm 90° Reducer (3.5″ to 2.5″)
- 89mm-76mm 90° Reducer (3 1/2″-3″)
- 89mm-80mm 90° Reducer (3 1/2″-3 1/8″)
- 95mm-76mm 90° Reducer (3 .75″-3″)
- 102mm-63mm 90° Reducer (4″-2.5″)
- 102mm-76mm 90° Reducer (4″-3″)
- 102mm-76mm 90° Reducer (4″-3″)
- 127mm-114mm 90° Reducer (5″-4.5″)
Select options This product has multiple variants. The options may be chosen on the product page -
Water Temp Sensor Adaptor
$19.90Water Temp Sensor Adaptor – These are an easy solution for adding a aftermarket temperature gauge sensor to your cooling system. Available in 28mm, 30mm, 32m, 34mm, 36mm, 38mm, 40mm & 42mm
Select options This product has multiple variants. The options may be chosen on the product page














