grid button list button

Showing 1–15 of 41 results

  • GFB Hybrid BOV NZ

    GFB Hybrid Blow Off Valve

    $369.00 – $669.00

    Known as the “Hybrid”, this world-first became the flagship model of the newly formed company Go Fast Bits. The two venting ports of this revolutionary valve were staged on the body such that the recirc port opened before the atmo port, helping to prevent backfiring and stalling on cars with a MAF sensor, whilst still giving the signature blow off sound when the car is driven harder.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Clutch & Flywheel Combo
    -9%

    Clutch & Lightweight Flywheel Combo

    $1,099.00 – $1,949.00

    EXEDY NZ are introducing a new range of their Heavy Duty Clutch Kits matched up to a Chrome Moly Lightweight Flywheel to suit some of the more popular Vehicles on our NZ Roads (Some kits also available as a 5Puk HDB Kit)

     

    This range will increase over time and begin to include not only the Japanese Road Car Market but also the very popular Off Road Vehicle Market with high demands for Extra Tuff Clutch Kits that can handle extreme Off Road Conditions aka Extreme Bush Bashing.

     

    Each Kit contains:

    *Chrome Moly Lightweight Flywheel

    *Genuine Exedy Heavy Duty Cover and Clutch Kit

    *Alignment Tool

    *Release Bearing & Spigot Bearing

    Select options This product has multiple variants. The options may be chosen on the product page
  • GFB Respons BOV NZ

    GFB Respons Blow Off Valve

    $435.00 – $825.00

    On the surface, the GFB Respons BOV look like just another dual-port blow-off valve, but the GFB Respons is actually much more than that. Featuring GFB’s patented venting bias adjustment system, the GFB Respons allows you to precisely control how much air vents from each of the two outlets.

    Select options This product has multiple variants. The options may be chosen on the product page

  • Mitsubishi Triton MQ & MR Silicone Intercooler Hoses

    $159.00 – $269.00

    Upgraded Silicone Replacement for the Factory Rubber Intercooler Hoses that commonly split. These are ideal if you are adding more boost but keeping the stock intercooler, with a higher heat rating to the factory rubber and more resistance to oil, these will outlast the stock soft rubber hoses.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Manifold vacuum Block
    -8%

    Manifold Vacuum Block – PRO Racing

    Original price was: $59.90.Current price is: $54.90.

    Manifold Vacuum Block – PRO Racing

    Universal boost/manifold vacuum block made of high quality CNC machined T6061 billet aluminum. This product is suitable for connecting pressurised controllers, instruments and any components that require a separate vacuum source.

    Add to cart
  • cobra lowering springs

    Mitsubishi Galant & Legnum Lowering Springs

    $199.90 – $699.80

    Cobra Lowering Springs to fit Mitsubishi Galant & Legnum (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height*
    Cobra Superlow Lowering Springs will approximately drop 40-45mm below standard height.
    Superlow coils may lower vehicle under 100mm ground clearance depending on wheel & tyre diameter. Certification will be required if this is the case.

    Select options This product has multiple variants. The options may be chosen on the product page

  • GFB Mach 2 Diverter Valve / BOV

    $319.00 – $615.00
    GFB MACH 2 Diverter Valve / BOV
    Using GFB’s TMS technology the Mach 2 can help return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears (more information below).
    Select options This product has multiple variants. The options may be chosen on the product page

  • Mitsubishi Triton MQ & MR OEM Rubber Intercooler Hose (Cold Side)

    $139.00

    OEM Quality Replacement for the Factory Intercooler Hoses that commonly split.

    These are a direct replacement to your standard intercooler hose.

    Add to cart
  • cobra lowering springs

    Mitsubishi Lancer & Cedia Sedan Lowering Springs

    $199.90 – $649.80

    Cobra Lowering Springs to fit Mitsubishi Lancer & Cedia Sedan (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height*
    Cobra Superlow Lowering Springs will approximately drop 40-45mm below standard height.
    Superlow coils may lower vehicle under 100mm ground clearance depending on wheel & tyre diameter. Certification will be required if this is the case.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Subaru Lightweight Pulley Kit

    Lightweight Pulley Kits

    $119.00 – $479.00

    GFB lightweight pulley kits are made from aircraft-grade 6061-T6 aluminium and offer faster acceleration through significant weight reduction on the crankshaft. The effect is similar to a lighter flywheel, and the car feels more lively and willing to rev.

    Most of our kits are underdriven, which means the accessories are driven slightly slower to reduce parasitic losses. It should be noted that our underdrive pulley kits do NOT adversely affect the operation of the accessories. If they did, we would not sell them!

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Mitsubishi Sigma Lowering Springs

    $299.90 – $699.80

    Cobra Lowering Springs to fit Mitsubishi Sigma (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height.

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Mitsubishi Diamante & Magna (NZ & AUS) Lowering Springs

    $299.90 – $649.80

    Cobra Lowering Springs to fit Mitsubishi Diamante / Magna (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height*
    Cobra Superlow Lowering Springs will approximately drop 40-45mm below standard height.
    Superlow coils may lower vehicle under 100mm ground clearance depending on wheel & tyre diameter. Certification will be required if this is the case.

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Mitsubishi Cordia Lowering Springs

    $299.90 – $599.80

    Cobra Lowering Springs to fit Mitsubishi Cordia (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height.

    Select options This product has multiple variants. The options may be chosen on the product page
  • cobra lowering springs

    Mitsubishi ASX Lowering Springs

    $299.90 – $599.80

    Cobra Lowering Springs to fit Mitsubishi ASX (see below for model fitment)

    Cobra Lowering springs will approximately drop 30-35mm below standard height.

    Select options This product has multiple variants. The options may be chosen on the product page
  • Mac Valve Holder NZ
    -8%

    Mac Valve Holder

    Original price was: $64.90.Current price is: $59.90.

    PRO Racing Billet 3 Port Mac Valve Bracket

    Feature:
    This bracket is designed for you to seamlessly install your MAC, AEM, or unbranded 3 port boost controller solenoid valve.   Features a step-down bolt hole to allow the use different size bolts for various mounting point options.

    Add to cart